SDI

Syscom-Prorep launch its production line for Industrial PC



Retour à la liste

GS2994-INE3

Multi-rate 3G Adaptive Cable Equalizer

Demand of reminder on this product

You are interested in this product ? Leave us your address and phone number to be contacted again by our services.

Name *

First name *

Company *

Postcode *

E-mail *

Tel *

* Please fill all the compulsory fields


Description

The GS2994 is a high-speed BiCMOS integrated circuit designed to equalize and restore signals received over 75ohm coaxial cable.

 The device is designed to support SMPTE 424M, SMPTE292M and SMPTE 259M, and is optimized for performance at 270Mb/s, 1.485Gb/s and 2.97Gb/s.

The GS2994 features DC restoration to compensate for the DC content of SMPTE pathological test patterns.

The Carrier Detect output pin (CD) indicates whether a valid input signal has been detected. It can be connected directly to the SLEEP pin to enable automatic power-down upon loss of carrier. In the manual sleep mode, a voltage programmable threshold, which can be changed via the SQ_ADJ pin, forces CD high when the input signal amplitude falls below the threshold. This allows the GS2994 to distinguish between low-amplitude SDI signals and noise at the input of the device.

The equalizing and DC restore stages are disengaged when the BYPASS pin is HIGH. No equalization occurs in Bypass mode.

The GS2994 includes a gain selection pin (GAIN_SEL) which, when tied HIGH, compensates for 6dB flat attenuation.

The differential outputs can be DC-coupled to Gennum 3.3V cable drivers and reclockers and to industry-standard 1.2V, 2.5V and 3.3V CML logic. In general, DC-coupling to any termination voltage between 1.2V and 3.3V is supported.

The GS2994 also includes programmable de-emphasis with three operating levels in order to support long PCB traces. The GS2994 is footprint and drop-in compatible with existing GS2974 and GS2984 designs.

The device is available in a 16-pin, 4mm x 4mm QFN package. Power consumption of the GS2994 is typically 166mW when DC-coupled at 1.2V.

The GS2994 is Pb-free, and the encapsulation compound does not contain halogenated flame retardant.

Features


  • SMPTE 424M, SMPTE 292M and SMPTE 259M compliant
  • Automatic cable equalization
  • Multi-standard operation from 143Mb/s to 2.97Gb/s
  • Performance optimized for 270Mb/s, 1.485Gb/s and 2.97Gb/s.  Typical equalized length of Belden 1694A cable:
    • 140m at 2.97Gb/s
    • 200m at 1.485Gb/s
    • 400m at 270Mb/s
  • Supports DVB-ASI at 270Mb/s
  • Manual bypass (useful for low data rates with slow rise/fall times)
  • Programmable carrier detect with squelch threshold adjustment
  • Automatic power-down on loss of signal
  • Standby power <30mW (typical)
  • Differential output, supports DC-coupling to 1.2V -> 3.3V CML logic
  • 0/6 dB gain boost selection pin • Selectable de-emphasis: 2dB, 4dB and 6dB
  • Standard EIA/JEDEC logic control and status signal levels
  • Single 3.3V power supply operation
  • 166mW power consumption (typical)
  • Wide operating temperature range of -40ºC to +85ºC
  • Small footprint QFN package (4mm x 4mm)
    • Footprint compatible with the GS2974 and the GS2984
  • Pb-free and RoHS compliant

Related products

You could also be interested in the following products :

Actualités

MTX-EOS
24/06/2020

IWMR-3002
15/06/2020

Multi-function industrial VPN router, 2x WiFi 11ac, 2x LTE 4G, 2x Ethernet Gigabit, 2 serial ports.

Universal TWN4 Slim RFID reader , ultra compact (65.5 x 45.5 mm and 4 mm) can read more than 60 RFID protocoles such as NFC and BLE.

Offered by Syscom-Prorep, parent company to 6TA, ArborTechnology's ASLAN IHM Industrial PC panels propose a large range of screens from 10.1 to 21.5 inches, and equipped with a Intel Core i5-6300U processor for implementations requiring...

Antenova, Syscom-Prorep's partner for years, has just released a document of the placement of antennas. A must read for any designers in communicating products!

Top
Changing Cookie Settings

Dear users, this website stores cookies on your computer. Their purpose is to improve your website experience while providing you with more personalized services.

If you would like more information about the cookies we use, please see our Privacy Policy. By accepting cookies, you consent to their use. You can also adjust their settings.

If you refuse cookies, your information will not be tracked when you visit this site. Only one cookie will be used in your browser to remember your preference not to be tracked.

  • Change the parameters
  • Accept all cookies and continue to the website