Demand of reminder on this product
Metallized Projective Capacitive Touch
Two metallized layers(x-y) are overlaid onto an LCD screen. These thin-film metallic panels have a lower impedance than typical ITO** touch panels. This allows for a higher S/N ratio, wider touch sense margin, and better overall sensitivity.
** ITO = Indium Tin Oxide
Selectable Touch Detection Method
Other than the general X-Y coordinate method, sections of the touch screen can be treated as individual switches.
A 1,000 cd/m2 TFT panel is used
*Actual brightness is 850cd/m2
Variable projection radius. Tested up to a 5mm acrylic overlay without a?ecting touch response under factory conditions.
No interference from gloves or liquid. Maintains a smooth HMI.
Handles up to 10 concurrent touches at a time.
Glass surface is damage-resistant and tolerant to chemical cleaning solutions.
Command-based controls are easily driven by o?-the-shelf MCUs.
|Display Size||154.08 x 85.92 mm (7 inch)|
|PCB Size||165.0 x 118.5 mm|
|Display Resolution||800 x 480 pixels|
|Number of Colors||approx. 65K Colors|
|Operating Temp.||-20 to +70 ?|
|Brightness (Typ.)||425 cd/m2 at 50% Brightness
850 cd/m2 at 100% Brightness
|Operating Power||5V / 720mA (Typical) with 100% Brightness|
|Interfaces||Serial interface (UART/ I2C/ SPI CMOS -level)
USB interface (High-speed / Full-speed)
|I/O Ports||26 general-purpose I/O ports|
|Character Fonts||ASCII / Japanese / Chinese / Korean (Outline font)|
|Touch Detection||Projection type capacitive.
Metallized Projective Capacitive Touch (MPCT) technology is used.
|Multiple Touch||10-point touch maximum (DRY condition|
You could also be interested in the following products :