Syscom-Prorep launch its production line for Industrial PC

Retour à la liste


12G UHD-SDI Cable Driver

Demand of reminder on this product

You are interested in this product ? Leave us your address and phone number to be contacted again by our services.

Name *

First name *

Company *

Postcode *

E-mail *

Tel *

* Please fill all the compulsory fields


The GS12081 is a low-power, multi-rate, cable driver supporting rates up to 12G UHD-SDI. It is designed to receive 100Ω differential input signals, and transmit the signal over 75Ω coaxial cables. The 100Ω trace input supports up to 17dB of insertion loss.

The device supports SMPTE ST 2082-1 (12G UHD-SDI), ST 2081-1 (6G UHD-SDI), ST 424 (3G SDI), ST 292-1 (HD-SDI) and ST 259 (SD-SDI). In addition to standard SMPTE rates, the device also supports DVB-ASI at 270Mb/s, MADI at 125Mb/s, and 10GbE.

The two cable drivers have highly configurable pre-emphasis and swing controls to compensate for long trace and connector losses. Additionally, automatic and user selectable output slew rate control is provided for each cable driver output.


  • Dual non-inverted 75Ω cable interface with on-chip termination
  • SMPTE ST 2082-1, ST 2081-1, ST 424, ST 292-1 and ST 259 compliant input/output
  • Multi-standard operation from 1Mb/s to 11.88Gb/s
  • Cable driver features:
  • Wide swing control
  • Pre-emphasis to compensate for significant insertion loss between device output and BNC
  • Manual output slew rate control
  • Manual or automatic Mute or disable on LOS
  • Trace equalizer features:
  • Integrated 100Ω, differential input termination
  • Automatic power down on loss of signal
  • Adjustable carrier detect threshold
  • DC-coupling from 1.2V to 2.5V CML logic
  • Trace equalization to compensate for up to 15” FR4 at 11.88Gb/s
  • Input offset compensation

Additional Features:

  • Single 1.8V power supply for analog and digital core
  • 2.5V or 3.3V for cable driver output supply
  • GSPI serial control and monitoring interface
  • Four configurable GPIO pins for control or status monitoring
  • Wide operating temperature range: -40°C to +85°C
  • Small 6mm × 4mm 40-pin QFN
  • Pb-free/Halogen-free/RoHS and WEEE compliant package
  • Pin compatible with the GS12181, GS12182, GS12281, and GS3281

Related products

You could also be interested in the following products :



Offered by Syscom-Prorep, parent company to 6TA, ArborTechnology's ASLAN IHM Industrial PC panels propose a large range of screens from 10.1 to 21.5 inches, and equipped with a Intel Core i5-6300U processor for implementations requiring...

Antenova, Syscom-Prorep's partner for years, has just released a document of the placement of antennas. A must read for any designers in communicating products!


Extended temperature range solutions for 5G implementations, improves communication in remote areas.

Digital View 4K UltraHD - Choose your LCD controller for your monitoring needs

Changing Cookie Settings

Dear users, this website stores cookies on your computer. Their purpose is to improve your website experience while providing you with more personalized services.

If you would like more information about the cookies we use, please see our Privacy Policy. By accepting cookies, you consent to their use. You can also adjust their settings.

If you refuse cookies, your information will not be tracked when you visit this site. Only one cookie will be used in your browser to remember your preference not to be tracked.

  • Change the parameters
  • Accept all cookies and continue to the website