SDI

Syscom-Prorep launch its production line for Industrial PC



Retour à la liste

GS3441-INE3

Long Reach, Dual Output, Multi-rate 3G Adaptive Cable Equalizer

Demand of reminder on this product

You are interested in this product ? Leave us your address and phone number to be contacted again by our services.

Name *

First name *

Company *

Postcode *

E-mail *

Tel *

* Please fill all the compulsory fields


Description

The GS3441 is a high-speed BiCMOS integrated circuit designed to equalize and restore signals received over 75ohm coaxial cable.

The device is designed to support SMPTE ST 424, SMPTE ST 292 and SMPTE ST 259, and is optimized for performance at 270Mb/s, 1.485Gb/s and 2.97Gb/s.

The GS3441 features DC restoration to compensate for the DC content of SMPTE pathological test patterns.

 The Carrier Detect output pin (CD) indicates whether a valid input signal has been detected. It can be connected directly to the SLEEP pin to enable automatic power-down upon loss of carrier. A voltage programmable threshold, which can be changed via the SQ_ADJ pin, forces CD high when the input signal amplitude falls below the threshold.

This allows the GS3441 to distinguish between low-amplitude SDI signals and noise at the input of the device.

The equalizing and DC restore stages are disengaged when the BYPASS pin is HIGH. No equalization occurs in Bypass mode.

The GS3441 includes a gain selection pin (GAIN_SEL) which, when tied HIGH, compensates for 6dB flat attenuation.

The differential outputs can be DC-coupled to all Gennum cable drivers and reclockers and to industry-standard 1.2V, 2.5V and 3.3V CML logic using the OP_CTL pins.

The GS3441 also includes programmable de-emphasis with three operating levels in order to support long PCB traces. The device is available in a 24-pin, 4mm x 4mm QFN package.

The GS3441 is Pb-free, and the encapsulation compound does not contain halogenated flame retardant.

This component and all homogeneous subcomponents are RoHS compliant.

Features


  • SMPTE ST 424, SMPTE ST 292 and SMPTE ST 259 compliant
  • Automatic cable equalization
  • Multi-standard operation up to 2.97Gb/s
  • Performance optimized for 270Mb/s, 1.485Gb/s and 2.97Gb/s. Typical equalized length of Belden 1694A cable:
    • 200m at 2.97Gb/s
    • 220m at 1.485Gb/s
    • 400m at 270Mb/s
  • Supports DVB-ASI at 270Mb/s
  • Dual, independantly-controlled outputs
  • Manual bypass (useful for low data rates with slow rise/fall times)
  • Programmable carrier detect with squelch threshold adjustment
  • Automatic power-down on loss of signal
    • Standby power <30 mW (typical)
  • Differential outputs support DC coupling to 1.2V, 2.5V and 3.3V CML logic
  • 0/6 dB gain boost selection pin
  • Cable Length Indicator output; varies monotonically with input cable length
  • Selectable de-emphasis: 2dB, 4dB and 6dB
  • Standard EIA/JEDEC logic control and status signal levels
  • Wide operating temperature range of -40ºC to +85ºC
  • Small footprint QFN package (4mm x 4mm)
  • Pb-free and RoHS compliant

Related products

You could also be interested in the following products :

Actualités

Offered by Syscom-Prorep, parent company to 6TA, ArborTechnology's ASLAN IHM Industrial PC panels propose a large range of screens from 10.1 to 21.5 inches, and equipped with a Intel Core i5-6300U processor for implementations requiring...

Antenova, Syscom-Prorep's partner for years, has just released a document of the placement of antennas. A must read for any designers in communicating products!

MEMXPRO
18/05/2020

MEMXPRO 32GB DDR4 3200
Extended temperature range solutions for 5G implementations, improves communication in remote areas.

Digital View 4K UltraHD - Choose your LCD controller for your monitoring needs

Top
Changing Cookie Settings

Dear users, this website stores cookies on your computer. Their purpose is to improve your website experience while providing you with more personalized services.

If you would like more information about the cookies we use, please see our Privacy Policy. By accepting cookies, you consent to their use. You can also adjust their settings.

If you refuse cookies, your information will not be tracked when you visit this site. Only one cookie will be used in your browser to remember your preference not to be tracked.

  • Change the parameters
  • Accept all cookies and continue to the website