SDI

Syscom-Prorep launch its production line for Industrial PC



Retour à la liste

GS3590-INE3

Bidirectional 3G-SDI Re-timing Adaptive Cable Equalizer/Cable Driver

Demand of reminder on this product

You are interested in this product ? Leave us your address and phone number to be contacted again by our services.

Name *

First name *

Company *

Postcode *

E-mail *

Tel *

* Please fill all the compulsory fields


Description

The GS3590 is a low-power, configurable multi-rate re-timing cable equalizer/cable driver supporting rates up to 3G UHD-SDI. It can be configured to equalize or drive signals over 75Ω coaxial cable. It includes DC restoration to compensate for the DC content of SMPTE pathological test patterns. Since the GS3590 is a re-timing device, extremely low output jitter is achievable even at extended cable/trace lengths.

Features


  • Single bidirectional 75Ω, cable interface with on-chip termination
  • SMPTE ST 424, ST 292-1 and ST 259 compliant input/output
  • Multi-standard operation from 1Mb/s to 2.97Gb/s
  • Supports re-timing for DVB-ASI at 270Mb/s and MADI at 125Mb/s
  • 3D Input Signal Eye Monitor
  • PRBS generator and checker
  • Automatic cable equalization. Typical equalized cable lengths of Belden 1694A cable:
    • 160m at 2.97Gb/s
    • 240m at 1.485Gb/s
    • 400m at 270Mb/s
  • Cable equalizer mode features:
    • Automatic power down on loss of signal
    • Programmable carrier detect with squelch threshold adjustment
    • Manual and automatic cable equalizer bypass
  • Cable driver mode features:
    • Wide swing control
    • Pre-emphasis to compensate for significant insertion loss between device output and BNC
    • Manual or automatic power-down of loss of signal
    • Manual or automatic Mute or Disable on LOS
  • Trace equalizer features:
    • Integrated 100&Omega, differential input termination
    • Manual or Automatic power down on loss of signal
    • Adjustable carrier detect threshold
    • DC-coupling from 1.2V to 2.5V CML logic
    • Trace Equalization to compensate for up to 60” FR4 at 2.97Gb/s
    • Automatic input offset compensation
  • Trace driver features:
    • Integrated 100&Omega, differential output termination
    • DC-coupling from 1.2V to 2.5V CML logic
    • Trace driver data output pre-emphasis to compensate for up to 60” FR4 at 2.97Gb/s
    • Manual or automatic Mute or disable on LOS
  • CDR features:
    • Manual or automatic rate modes
    • Manual or Automatic Re-timer Bypass
    • Wide-range Loop bandwidth control
    • Re-timing at the following data rates: 125Mb/s, 270Mb/s, 1.485Gb/s, 2.97Gb/s. This includes the f/1.001 rates.
  • Additional Features:
    • Single 1.8V power supply for analog and digital core
    • 2.5V for cable driver output supply
    • 1.2V, 1.8V, or 2.5V for Trace Driver output supply
    • GSPI serial control and monitoring interface
    • Four configurable GPIO pins for control or status monitoring
    • Wide operating temperature range: -40ºC to +85ºC
    • Small 6mm x 4mm 40-pin QFN
    • Pb-free/Halogen-free/RoHS & WEEE compliant package
    • Pin compatible with GS12090

Related products

You could also be interested in the following products :

Actualités

MTX-EOS
24/06/2020

Offered by Syscom-Prorep, parent company to 6TA, ArborTechnology's ASLAN IHM Industrial PC panels propose a large range of screens from 10.1 to 21.5 inches, and equipped with a Intel Core i5-6300U processor for implementations requiring...

Antenova, Syscom-Prorep's partner for years, has just released a document of the placement of antennas. A must read for any designers in communicating products!

MEMXPRO
18/05/2020

MEMXPRO 32GB DDR4 3200
Extended temperature range solutions for 5G implementations, improves communication in remote areas.

Digital View 4K UltraHD - Choose your LCD controller for your monitoring needs

Top
Changing Cookie Settings

Dear users, this website stores cookies on your computer. Their purpose is to improve your website experience while providing you with more personalized services.

If you would like more information about the cookies we use, please see our Privacy Policy. By accepting cookies, you consent to their use. You can also adjust their settings.

If you refuse cookies, your information will not be tracked when you visit this site. Only one cookie will be used in your browser to remember your preference not to be tracked.

  • Change the parameters
  • Accept all cookies and continue to the website