Cartes industrielles

Retour à la liste

Demande de rappel sur ce produit

Vous êtes intéressé par ce produit ? Laissez-nous vos coordonnées pour être recontacté par nos services.

Nom *

Prénom *

Société *

Code postal *

E-mail *

Téléphone *

* Veuillez remplir tous les champs obligatoires


Description

SMARC-iMX8M : Embedian, The leading embedded computing company

Technical Information
Part Number
SMARC-iMX8M part number
  • 1: D (dual core, CPU running up to 2 x 1.5GHz)
        L (quad lite core, CPU running up to 4 x 1.5GHz, No VPU)
        Q (quad core, CPU running up to 4 x 1.5GHz)
  • 2: 2G (2GB LPDDR4 memory up to 3200MT/s)
         4G (4GB LPDDR4 memory up to 3200MT/s)
  • 3: I: Industrial temperature (-40oC ~ 85oC if 2GB LPDDR4 memory and -30oC ~ 85oC if 4GB LPDDR4 memory); Leave it Blank for commercial temperature.
  • 4: C: Conformal coating, only support industrial temp. variants; Leave it Blank if you do not need it.
Note: SMARC-iMX8M supports 1.8V (SMARC 2.0) VDDIO.

Example: SMARC-iMX8M-D-2G stands for dual core i.MX8M processor running up to 2 x 1.5GHz with 2GB LPDDR4 memory in normal operating temperature.

Compliance
SMARC 2.0 Compliant

Dimension (W x L)
82mm x 50mm

CPU
NXP i.MX8M ARM Cortex-A53 and Cortex-M4 up to 1.5GHz

Dual, Quad Lite and Quad Core Cortex-A53

266Mhz Cortex-M4

Main Memory
2GB/4GB LPDDR4 up to 3200MT/s

8GB eMMC (5.x) onboard

AT24C32 EEPROM onboard

Graphic Controller
GC7000Lite 4 shaders, OpenGL ES 3.1, OpenCL 1.2, OpenGL 3.0, OpenVG and Vulkan

Up to 4kp60 UHD resolutions

Video Processing Unit (VPU)
HEVC/H.265, H.264, VP9 Decoder 1080p60 MPEG-2, MPEG-4p2, VC-1, VP8, RV9, AVS, MJPEG, H.263 Decoder

No VPU for Quad Lite Core

Display Interfaces
Single channel 24 bit LVDS LCD or dual channel 24-bit LVDS LCD
  • Panel support signals (I2C, Power Enables, PWM)
  • 2nd LVDS channel is defined on SMARC 2.0 interface
  • Resolutions up 1,920 x 1,200 @60 fps at 24 bpp

One HDMI 2.0a/DP port resolution up to 4096 x 2160 at 60 Hz

MIPI-CSI Camera Interfaces
One 4-LANE and one 2-lane MIPI-CSI ports

SDIO Interfaces
One SDIO interfaces
  • 4 bit SDIO card interface with support lines
  • 8 bit eMMC interface with support lines

SPI Interfaces
Two SPI interfaces with 2 chip selects on each SPI channel

I2S Interfaces
Two I2S interfaces
  • Typically used for connection to I2S audio CODECs

I2C Interfaces
Five I2C interfaces
  • Power Management
  • General Purpose
  • Camera
  • LCD Display ID
  • HDMI

Asynchronous Serial Port (UART) Interfaces
Four asynchronous serial ports

Two with 4 wire handshake (RXD, TXD, RTS#, CTS#)

Two with data only (RXD, TXD)

Logic level signals

CAN Bus Interfaces
Two CAN bus interfaces
  • Logic level signals from Module based CAN bus protocol controllers
  • RXD, TXD only
  • Two Module GPIOs are designated for optional use as CAN bus error status inputs

USB Interfaces
Two USB OTG 2.0 Ports with PHY

Two USB 3.0 Host Ports with PHY

USB support signals (VBUS enable / Over-current detects, OTG support signals)

PCI Express (Dual Core only)
Two PCIe x 1 link

PCIe Gen2.0

Reference Clock Pair

Could be configured as PCIe target

Common PCIe wake signal

Gigabit Ethernet (with AVB)
One analog GBE MDI interface (Qualcomm Atheros AR8035 PHY on module)

No magnetics on Module

LED support signals

Watchdog Timer Interfaces
 

Real-Time Clock
External Seiko S35390A onboard

General Purpose I/O
Twelve GPIO signals

Specific alternate functions are assigned to some GPIOs

PWM / Tachometer capability

Camera support

CAN Error Signaling

HD Audio reset

System and Power Management Signals
Reset out and Reset in

Power button in

Power source status

Module power state status

System management pins

Battery and battery charger management pins

Carrier Power On control

Power Consumption (Typical)
Dual Core (2GB LPDDR4): 3W

Quad Core (4GB LPDDR4): 3.5W

Boot Source Select
Three pins to allow selection from Carrier Board

Select options to include boot from one of the following:
  • Module eMMC Flash (Default)
  • Module Remote Boot (Network Port)
  • Carrier SPI
  • Carrier SD Card


Power Supply
3V to 5.25V:
Operates directly from single level Lithium Ion cells, or fixed 3.3V or 5V power supply


Software
Linux and Android:
Based on NXP (Freescale) imx_v4.9.88_2.0.0_ga

Yocto Project Support

Ubuntu 14.04 and 16.04 LTS or Debian 9 Support

Android Oreo 8.1


Temperature
Industrial Temperature
Operating Temperature Range: -45o C ~ 85o C (For 4GB LPDDR4, -30o C ~ 85o C)

Storage Temperature Range: -40o C ~ 150o C

Junction Temperature Range: -40o C ~ 150o C


Form Factor
SMARC 2.0:
82 mm x 50 mm by SMARC 2.0 Specification


Evaluation Baseboard (EVK-STD-CARRIER-S20)
Features:
12V~24V Power input with 2.5mm DC Jack connector

3.5mm Audio Jack (SGTL5000 Audio Codec on Carrier)

RTC backup battery holder

Buzzer

LVDS, Display Port (DP)) and HDMI connector

2 x 10/100/1000Mbps RJ-45 connector

2 x RS232/422/485 DSUB9 connector, 2 x RS232 2.0mm Header

2 x USB host 2.0 type A connectors, 2 x USB host 3.0 type A connectors, 1 x mini USB client connector

1 x PCIex4 connector, 2 x mini PCIe connector

2 x CAN BUS header, 1 x 2x7-pin GPIO header, Audio Mic. in and Speaker out Audio Jack

2 x I2C header (for capacitive touch), 4 x SPI header, 1 Camera/MIPI header

1 x SDHC connector

A single 4KB EEPROM is provided on I2C0 that holds the board information. This information includes board name, serial number, and revision information.

1 x external watchdog reset

jumpers for LCD 3.3V or 5V voltage, boot selection, RS232 or RS485 selection

Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor)

 

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Jetway, l'un des principaux fabricants mondiaux de PC industriels (IPC), est heureux de lancer la série HBFMF833 (W), un serveur barebone sans ventilateur certifié IP69K avec connecteurs M12 pour les environnements extrêmes.

Top