Retour à la liste

EA DOGL128-6

This new display series was specially developed for low-power hand-held applications and for small and large quantities. For the first time it is possible to operate a standard display at 3.3V! 5V operation is for the character displays also possible. The optionally available LED backlighting can also be run with 3.3V or 5V depending on the connections. Various types and colors are standard. Graphic Displays ◾102x64 dots, 1.7" (EA DOGS102-6) ◾132x32 dots, 2.1" (EA DOGM132-5) ◾128x64 dots, 2.3" (EA DOGM128-6) ◾128x64 dots, 2.8" (EA DOGL128-6) ◾240x64 dots, 3.6" (EA DOGM240-6) ◾160x104 dots, 3.3" (EA DOGXL160-7) ◾240x128 dots, 3.9" (EA DOGXL240-7)

Demande de rappel sur ce produit

Vous êtes intéressé par ce produit ? Laissez-nous vos coordonnées pour être recontacté par nos services.

Nom *

Prénom *

Société *

Code postal *

E-mail *

Téléphone *

* Veuillez remplir tous les champs obligatoires


Description

Advantages

  • extreme compact
  • Graphic 102x32 .. 240x128 for +3.3V
  • flat at 2.0(2.8) mm without backlighting and 5.8(6.4) mm with backlighting
  • can be soldered directly into the PCB without any further assembly
  • graphic display: SPI interface (160x104, 240x64 and 240x128 also I²C)
  • 3.3V or 5V - also for the LED backlighting
  • many different designs which can be implemented as of 1 unit
  • Top. -20..+70°C integrated temperature compensation
  • no minimum quantities, short delivery times

Graphic Displays

  • 102x64 dots, 1.7" (EA DOGS102-6)
  • 132x32 dots, 2.1" (EA DOGM132-5)
  • 128x64 dots, 2.3" (EA DOGM128-6)
  • 128x64 dots, 2.8" (EA DOGL128-6)
  • 240x64 dots, 3.6" (EA DOGM240-6)
  • 160x104 dots, 3.3" (EA DOGXL160-7)
  • 240x128 dots, 3.9" (EA DOGXL240-7)

Ultra thin construction

With a height of just 2.0(2.8) or 5.8(6.4) mm. And this has been achieved without any special construction, but rather with easily processed pins with a pitch of 2.54 mm.
It is also possible to implement a plug-in design using contact strips.
For further information, please compare to the relating data sheet

 Technical Data

* CONTROLLER UC1611s WITH INTEGRATED GRAPHIC-RAM* HIGH-CONTRAST LCD SUPERTWIST DISPLAY (STN AND FSTN) WITH 15μm DOT GAP
* OPTIONAL LED BACKLIGHTS IN VARIOUS COLORS
* 128x64 PIXELS (CORRESPONDS TO 8x21 CHARACTERS OR 4x16 LARGE CHARACTERS)
* ST7565R CONTROLLER WITH SPI (4-WIRE) INTERFACE
* POWER SUPPLY: SINGLE SUPPLY 3.0V TO 3.3V (TYPICALLY 320μA)
* NO ADDITIONAL VOLTAGES REQUIRED
* OPERATING TEMPERATURE RANGE -20°C TO +70°C (STORAGE -30°C TO +80°C)
* LED BACKLIGHTING 5mA TO 90mA
* NO MOUNTING REQUIRED: SIMPLY SOLDER ONTO PCB

 

Télécharger le(s) PDF(S)

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Jorjin Technologies propose un combo BLE 4.2 & Sigfox basé sur le chipset STM BlueNRG-1

Quectel propose le module EG25-G offrant une connectivité globale avec 30 bandes radio couvertes en LTE, 3G et 2G.
Basé sur le chipset Qualcomm MDM9x07 et suivant la release 11 LTE du 3GPP, le débit descendant atteint 150Mb/s et le débit montant...

Les avantages des OLEDs sont connus: fort contraste, angle de vue, temps de réponse ultra-rapide, température d'utilisation étendue…
Mais les séries OLEDs d'Electronic Assembly sont capables de beaucoup plus

LA SURVEILLANCE DE LA QUALITÉ DE L’AIR, UN DÉFI? LE NOUVEAU CAPTEUR DE PARTICULES DE LA SÉRIE HPM D’HONEYWELL EST LÀ POUR VOUS AIDER

Fujitsu Components sélectionne Wirepas Mesh pour faciliter le développement de solutions IoT

Top