Retour à la liste


Description

The TWN4 family of transponder readers and writers allows users to read and write to almost any 125 kHz / 134.2 kHz and 13.56 MHz tags and/or labels. TWN4 MultiTech also supports all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID, LEGIC, and ISO standards like ISO14443A (T=CL ), ISO14443B (T=CL), ISO15693, ISO18092 / ECMA-340 (NFC). Key features of the TWN4 MultiTech include a powerful SDK for writing Apps which are executed directly on the reader, infield upgradeable firmware, direct chip-commands support, and additional interfaces for the OEM PCB version. TWN4 MultiTech simultaneously reads more than fifty RFID technologies from both the low frequency (LF) and high frequency (HF) bands, including NFC. This provides the option to select as many of the technologies required instead of being forced to select just a few like most other readers. In addition, TWN4 MultiTech can also be used as a diagnostic tool by installing the card analyzer application called TechTracer. It now becomes capable of identifying the card type, data length, and unique identification number. This eliminates the requirement to physically send cards off-site for identification while potentially saving weeks of waiting for the diagnosis. Analyzing the card in front of the end customer demonstrates that the card can be read, which is normally a requirement of a proof-of-concept. Available as PCB or housed device LEGIC chip for reading LEGIC RFID standards supports TWN4 MultiTech underlying technology three frequencies: 125/134.2 kHz, 13.56 MHz wireless (re)programmable integrated antennas USB, RS232, TTL serial (logical level 3.3 V,CMOS 5 V tolerant), I²C, SPI, Clock/Data, Wiegand, CAN, 1-Wire Two on-board SAM sockets (Secure Access Module) CCID and PC/SC 2.01 2 GPIOs (General Purpose Input/Output)

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Salon SIDO
30/03/2018

Syscom-Prorep sera au salon SIDO sur l'IoT à Lyon les 4-5 avril 2018

Le salon MtoM a encore une fois été un succès avec de nombreuses nouveautés en Lora/Sigfox, RFID, modules LTE et solutions eINK connectées.

The RDK-12GCONV UHD Converter Reference Design demonstrates the use of
Semtech's GS12241 12G UHD-SDI Re-timing Adaptive Equalizer, GS12090 Bidirectional
12G UHD-SDI Cable Equalizer/Driver, GS12281 12G UHD-SDI Re-timing Cable Driver,
and GS12070...

Software-Defined SFP, SDI dual receivers - IP switch host, MSA, HD-BNC

The software-defined SFP (emSFP) is a new class of SFP/SFP+ and emSFP where the hardware is generic (dual receiver to ANY format) and the software will dictated what the...

NEMEUS lance le Smart IoT Sensor compatible Arduino dédié à la réalisation de prototypes utilisant les technologies Sigfox®, LoRa®, Bluetooth® Low Energy, GPS/ GNSS

ACTUELLEMENT EN PROMOTION

Top