Retour à la liste


Description

The TWN4 family of transponder readers and writers allows users to read and write to almost any 125 kHz / 134.2 kHz and 13.56 MHz tags and/or labels. TWN4 MultiTech also supports all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID, LEGIC, and ISO standards like ISO14443A (T=CL ), ISO14443B (T=CL), ISO15693, ISO18092 / ECMA-340 (NFC). Key features of the TWN4 MultiTech include a powerful SDK for writing Apps which are executed directly on the reader, infield upgradeable firmware, direct chip-commands support, and additional interfaces for the OEM PCB version. TWN4 MultiTech simultaneously reads more than fifty RFID technologies from both the low frequency (LF) and high frequency (HF) bands, including NFC. This provides the option to select as many of the technologies required instead of being forced to select just a few like most other readers. In addition, TWN4 MultiTech can also be used as a diagnostic tool by installing the card analyzer application called TechTracer. It now becomes capable of identifying the card type, data length, and unique identification number. This eliminates the requirement to physically send cards off-site for identification while potentially saving weeks of waiting for the diagnosis. Analyzing the card in front of the end customer demonstrates that the card can be read, which is normally a requirement of a proof-of-concept. Available as PCB or housed device LEGIC chip for reading LEGIC RFID standards support of segment initialization function supports TWN4 MultiTech underlying technology three frequencies: 125/134.2 kHz, 13.56 MHz wireless (re)programmable integrated antennas USB, RS232, TTL serial (logical level 3.3 V,CMOS 5 V tolerant), I²C, SPI, Clock/Data, Wiegand, CAN, 1-Wire two on-board SAM sockets (Secure Access Module) CCID and PC/SC 2.01 2 GPIOs (General Purpose Input/Output)

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Les avantages des OLEDs sont connus: fort contraste, angle de vue, temps de réponse ultra-rapide, température d'utilisation étendue…
Mais les séries OLEDs d'Electronic Assembly sont capables de beaucoup plus

LA SURVEILLANCE DE LA QUALITÉ DE L’AIR, UN DÉFI? LE NOUVEAU CAPTEUR DE PARTICULES DE LA SÉRIE HPM D’HONEYWELL EST LÀ POUR VOUS AIDER

Fujitsu Components sélectionne Wirepas Mesh pour faciliter le développement de solutions IoT

The RDK-12GCONV UHD Converter Reference Design demonstrates the use of
Semtech's GS12241 12G UHD-SDI Re-timing Adaptive Equalizer, GS12090 Bidirectional
12G UHD-SDI Cable Equalizer/Driver, GS12281 12G UHD-SDI Re-timing Cable Driver,
and GS12070...

NEMEUS lance le Smart IoT Sensor compatible Arduino dédié à la réalisation de prototypes utilisant les technologies Sigfox®, LoRa®, Bluetooth® Low Energy, GPS/ GNSS

ACTUELLEMENT EN PROMOTION

Top