Retour à la liste


Description

The MCS9835CV-BA is a PCI based single function I/O Adapter. It has two 16C450/16C550 compatible UART channels and one IEEE 1284 compliant parallel port. The MCS9835CV-BA has 32-Byte transmit and receive FIFO for each UART channel. MCS8935CV-BA performs serial-to-parallel conversions on data received from a Serial device, and parallel-to-serial conversions on data received from its CPU. Parallel Port interface in MCS9835CV-BA is an IEEE 1284 compliant SPP / PS2 / EPP / ECP Parallel Port that fully supports Centronics interface. The MCS9835CV-BA is ideally suited for PC applications, such as Add-On COM ports and Parallel Ports. It is available in 128-Pin QFP package & fabricated using an advanced submicron CMOS process to achieve low power drain and high-speed requirements. MCS9835CV-BA is designed to be pin compatible with previous version of MCS9835CV. Existing designs of MCS9835 can be migrated to MCS9835CV-BA without any modification to system design. Software compatibility is also maintained between MCS9835 to MCS9835CV-BA. General 5V Operation Low Power Fully compliant with PCI Local Bus Specification 2.3 Re-map function for Legacy Ports Microsoft WHQL Complaint Drivers Advanced testability through scan addition Serial Port Two 16C 450 / 550 compatible UARTs Supports RS232, RS485 & RS422 modes Bi-directional Speeds from 50 bps to 115200 bps / Port Full Serial modem control Supports Hardware Flow Control 5, 6, 7, 8-bit Serial format support Even, Odd, None, Space & Mark parity supported On Chip 32 Byte FIFOs in Transmit, Receive paths for both Serial Port IEEE1284 Parallel Port Multi-mode IEEE1284 compliant controller (SPP, PS2, EPP, ECP) Faster data rates up to 1.5Mbytes/sec for Parallel Port Miscellaneous Four-Wire SPI Interface for EEPROM EEPROM read through PCI Package : 128-Pin QFP, RoHS Operating Temperature : 0 to +70°C

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Les avantages des OLEDs sont connus: fort contraste, angle de vue, temps de réponse ultra-rapide, température d'utilisation étendue…
Mais les séries OLEDs d'Electronic Assembly sont capables de beaucoup plus

LA SURVEILLANCE DE LA QUALITÉ DE L’AIR, UN DÉFI? LE NOUVEAU CAPTEUR DE PARTICULES DE LA SÉRIE HPM D’HONEYWELL EST LÀ POUR VOUS AIDER

Fujitsu Components sélectionne Wirepas Mesh pour faciliter le développement de solutions IoT

The RDK-12GCONV UHD Converter Reference Design demonstrates the use of
Semtech's GS12241 12G UHD-SDI Re-timing Adaptive Equalizer, GS12090 Bidirectional
12G UHD-SDI Cable Equalizer/Driver, GS12281 12G UHD-SDI Re-timing Cable Driver,
and GS12070...

NEMEUS lance le Smart IoT Sensor compatible Arduino dédié à la réalisation de prototypes utilisant les technologies Sigfox®, LoRa®, Bluetooth® Low Energy, GPS/ GNSS

ACTUELLEMENT EN PROMOTION

Top