Retour à la liste


Description

MCS9900 is a single lane multifunction PCI express to I/O controller. It supports two modes of operations which are selectable through device mode select pins. Mode1 supports four serial ports and GPIO, Mode2 supports two serial ports, one parallel port and GPIO. MCS9900 also provides an option for peripheral expansion through proprietary Cascade interface. The generic cascade interface allows interconnection with similar chips like MCS9900, MCS9904, MCS9901CV-CC & MCS9922 for port expansion. The serial ports are compatible with RS232, RS422 & RS485 standards and supports throughput from 50bps to 16Mbps. Parallel Port is compatible with IEEE 1284 and supports Nibble, Byte, SPP, ECP, and EPP modes. All the GPIO pins are programmable and can be used as Input or Output. An I2C interface is provided to configure MCS9900 device options through an external EEPROM. PCI Express Single-lane (X1) PCI Express End-point Controller with integrated PHY Compliant with PCI Express Base Specification, Revision 1.1 Compliant with PCI Express card specifications Supports four PCI Express functions Supports auto completion of configuration requests Supports built in flow control Supports Message TLP (Error) generation Supports integrated time out handling of Non-posted request Supports both legacy and MSI Interrupt Supports PCIe Power Management Serial Port Four 16C450 / 550 / Extended 550 / 650 / Enhanced Mode compatible UARTs Supports RS232, RS422 & RS485 modes Bi-directional speeds from 50 bps to 16 Mbps per port Full Serial Modem Control Supports Hardware, Software Flow Control Supports 5, 6, 7, 8 bit Serial format Supports Even, Odd, None, Space and Mark parity Supports Custom baud rate by programming internal PLL or external clock Supports On Chip 256 Byte depth FIFOs in Transmit, Receive path of each Serial Port Supports remote wakeup and power management features Serial Port transceiver shutdown support Supports Slow IrDA mode (up to 115200bps) on all Serial Ports Parallel Port Compatible with IEEE 1284 Nibble Mode Byte Mode Enhanced Parallel Port (EPP 1.9) Extended Capability Port (ECP) FIFO mode (Buffered SPP mode) Cascade : MCS9900 supports a 13-Pin proprietary interface to connect to other cascade supported ASIX devices for IO expansion. For example, MCS9900 can interface with another MCS9900 to derive following product configurations PCIe to 8 Serial Ports PCIe to 6 Serial Ports and 1 Parallel Port PCIe to 4 Serial Ports and 2 Parallel Ports General Device Features I²C interface for EEPROM EEPROM read / write through PCIe Interface Up to 8 bi-directional multi-function GPIO lines On chip oscillator Power supply : 1.2V, 3.3V Package : 128-Pin LQFP, RoHS Operating Temperature : 0 to +70°C

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Salon SIDO
08/04/2018

Syscom-Prorep était au salon SIDO sur l'IoT à Lyon les 4-5 avril 2018

The RDK-12GCONV UHD Converter Reference Design demonstrates the use of
Semtech's GS12241 12G UHD-SDI Re-timing Adaptive Equalizer, GS12090 Bidirectional
12G UHD-SDI Cable Equalizer/Driver, GS12281 12G UHD-SDI Re-timing Cable Driver,
and GS12070...

Software-Defined SFP, SDI dual receivers - IP switch host, MSA, HD-BNC

The software-defined SFP (emSFP) is a new class of SFP/SFP+ and emSFP where the hardware is generic (dual receiver to ANY format) and the software will dictated what the...

NEMEUS lance le Smart IoT Sensor compatible Arduino dédié à la réalisation de prototypes utilisant les technologies Sigfox®, LoRa®, Bluetooth® Low Energy, GPS/ GNSS

ACTUELLEMENT EN PROMOTION

Top