Retour à la liste


Description

MCS9901CV-CC is a single lane multifunction PCI express to I/O controller. It supports two serial ports, one parallel port and six GPIO's. MCS9901CV-CC also provides an option for peripheral expansion through proprietary Cascade interface. The generic cascade interface allows interconnecting with similar chips like MCS9900, MCS9950 to expand the peripheral ports. The serial ports are compatible with RS232, RS422 & RS485 standards and supports throughput from 50bps to 16Mbps. Parallel Port is compatible with IEEE 1284 and supports Nibble, Byte, SPP, ECP, and EPP modes. All the GPIO pins are programmable and can be used as Input or Output. An I²C interface is provided to configure MCS9901CV-CC device options through an external EEPROM. PCI Express Single-lane (X1) PCI Express End-point Controller with integrated PHY Compliant with PCI Express Base Specification, Revision 1.1 Compliant with PCI Express Card Specifications Supports three PCI Express functions Supports auto completion of configuration requests Supports built in flow control Supports Message TLP (Error) generation Supports integrated time out handling of Non-posted request Supports both legacy and MSI Interrupt Supports PCIe Power Management Serial Port Two 16C450 / 550 / Extended 550 / 650 / Enhanced Mode compatible UARTs Supports RS232, RS422 & RS485 modes Bi-directional speeds from 50 bps to 16 Mbps per port Full Serial Modem Control Supports Hardware, Software Flow Control Supports 5, 6, 7, 8 bit Serial format Supports Even, Odd, None, Space and Mark parity Supports Custom baud rate by programming internal PLL or external clock Supports On Chip 256 Byte depth FIFOs in Transmit, Receive path of each Serial Port Supports remote wakeup and power management features Serial Port transceiver shutdown support Supports Slow IrDA mode (up to 115200bps) on all Serial Ports Parallel Port Compatible with IEEE 1284 Nibble Mode Byte Mode Enhanced Parallel Port (EPP 1.9) Extended Capability Port (ECP) FIFO mode (Buffered SPP mode) Cascade : MCS9901CV-CC supports a 13-Pin proprietary interface to connect to other ASIX devices for IO expansion. Through this interface, MCS9901CV-CC can be used as Cascade Secondary device and can be connected to Cascade Primary capable ASIX Devices like MCS9900. Eg. MCS9901CV-CC can be connected to MCS9900, for following product configurations. PCIe to 6 Serial Ports and 1 Parallel Port PCIe to 4 Serial Ports and 2 Parallel Ports General Device Features I²C interface for EEPROM EEPROM read / write through PCIe Interface Six bi-directional multi-function GPIO lines On chip oscillator Power supply : 1.2V, 3.3V Ordering information Ordering Part Number : MCS9901CV-CC Package : 128-Pin LQFP, RoHS Operating Temperature : 0 to +70°C

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Les avantages des OLEDs sont connus: fort contraste, angle de vue, temps de réponse ultra-rapide, température d'utilisation étendue…
Mais les séries OLEDs d'Electronic Assembly sont capables de beaucoup plus

LA SURVEILLANCE DE LA QUALITÉ DE L’AIR, UN DÉFI? LE NOUVEAU CAPTEUR DE PARTICULES DE LA SÉRIE HPM D’HONEYWELL EST LÀ POUR VOUS AIDER

Fujitsu Components sélectionne Wirepas Mesh pour faciliter le développement de solutions IoT

The RDK-12GCONV UHD Converter Reference Design demonstrates the use of
Semtech's GS12241 12G UHD-SDI Re-timing Adaptive Equalizer, GS12090 Bidirectional
12G UHD-SDI Cable Equalizer/Driver, GS12281 12G UHD-SDI Re-timing Cable Driver,
and GS12070...

NEMEUS lance le Smart IoT Sensor compatible Arduino dédié à la réalisation de prototypes utilisant les technologies Sigfox®, LoRa®, Bluetooth® Low Energy, GPS/ GNSS

ACTUELLEMENT EN PROMOTION

Top