Retour à la liste


Description

The ZT230E series devices are +5V powered EIA/TIA-232 and V.28/V.24 communication interfaces with low power requirements. These transceivers consist of combinations up to five line drivers, five line receivers and the proprietary switch-capacitor regulated voltage converters. The ZT211E and ZT213E/AE feature a low power shutdown mode which draws as little current as 1µA typical with receiver outputs tri-stated and in wake-up. These devices operate from a single +5V power supply at the guaranteed data rate of 250K bits/sec with enhanced electrostatic discharge (ESD) protection in all RS232 I/O pins exceeding ±15kV HBM. Meets EIA/TIA-232F and CCITT V.28/V.24 specifications for Vcc at +5V ±10% Low Quiescent Current - 3mA Low Shutdown Current (where applicable) -1µA typical, 10µA max Guaranteed Standard Data Rate 250Kbps Proprietary Switch-Capacitor Regulated Voltage Converters (patent pending) Wake Up Feature in Shutdown Mode Tri-State Receiver Outputs Latch-up Free ESD Protection for RS-232 I/O’s ±15kV Human Body Model (HBM) Drop-in Replacements for MAX207E, SP207E, MAX208E, SP208E, MAX211E, SP211E, MAX213E, SP213E, ADM213, HIN213, SP213A High Data Rate at 1000Kbps Available on ZT230F Series

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Salon SIDO
08/04/2018

Syscom-Prorep était au salon SIDO sur l'IoT à Lyon les 4-5 avril 2018

Le salon MtoM a encore une fois été un succès avec de nombreuses nouveautés en Lora/Sigfox, RFID, modules LTE et solutions eINK connectées.

The RDK-12GCONV UHD Converter Reference Design demonstrates the use of
Semtech's GS12241 12G UHD-SDI Re-timing Adaptive Equalizer, GS12090 Bidirectional
12G UHD-SDI Cable Equalizer/Driver, GS12281 12G UHD-SDI Re-timing Cable Driver,
and GS12070...

Software-Defined SFP, SDI dual receivers - IP switch host, MSA, HD-BNC

The software-defined SFP (emSFP) is a new class of SFP/SFP+ and emSFP where the hardware is generic (dual receiver to ANY format) and the software will dictated what the...

NEMEUS lance le Smart IoT Sensor compatible Arduino dédié à la réalisation de prototypes utilisant les technologies Sigfox®, LoRa®, Bluetooth® Low Energy, GPS/ GNSS

ACTUELLEMENT EN PROMOTION

Top