Retour à la liste


Description

The ZT308xE series devices are 5V differential data line transceivers for RS485/RS422 communication that consist of one driver and one receiver with high level of ESD protection. They are designed for balanced transmission lines interface that meet ANSI standard TIA/EIA-485-A and ISO 8482:1987(E) specifications. The ZT308xE series devices spans out with half or full duplex, data rate guaranteed at 250Kbps, 1Mbps, or 20Mbps and allow one-eighth of an unit load that fan out 256 devices sharing a common bus. The I/Os are enhanced-electrostatic discharge (ESD) protected, exceeding ±15kV Human Body Model (HBM). Meets or exceeds the requirements of ANSI Standard TIA/EIA-485-A and ISO 8482:1987(E) specifications for V cc at +5V ±10% Low quiescent current: 0.4mA typ., 0.9mA max Low shutdown current (where applicable): 1nA typical, 10μA max Guaranteed standard data rate 250Kbps, 1Mbps, or 20Mbps True Fail-Safe (Open, Short, Bus Idle) Receiver -7V to +12V common-mode input voltage range Half-Duplex or Full-Duplex mode configuration Allows up to 1/8 unit load (256 devices) on the same common bus Controlled driver output slew rate and receiver input filtering Active-high driver enable and active-low receiver enable ESD protection on bus terminals ±15kV Human Body Model (HBM) Alternative replacement for MAX308xE series, SN75HVD3082E, and SN65HVD3082E series

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Antenova propose une nouvelle antenne IoT ultra-fine dans sa famille Reflector permettant l'intégration dans des boitiers en métal

JETWAY propose des processeurs ROCKCHIP sur différents formats de carte: Pico-ITX; Micro-ATX; SBC 3.5''; SBC2.5'' et SBC 1.8''

Quectel Wireless lance deux nouveaux modules BG95 et BG97 multi-mode Cat M1, Cat NB2 et eGPRS
Le BG97 supportant le Cat M1/Cat NB2 et GNSS offre une taille réduite de 14mm x 15mm, idéale pour des applications compactes

Top