Retour à la liste


The ZT485H series devices are 5V differential data line transceivers for RS485/RS422 communication that consist of one driver and one receiver with high level of ESD protection. They are designed for balanced transmission lines interface that meet ANSI standard TIA/EIA-485-A and ISO 8482:1987(E) specifications. The ZT485H series devices spans out with half or full duplex, data rate guaranteed at 250K bit per second or 10Mbps, and allow one-eighth of an unit load that fan out 256 devices sharing a common bus. The I/Os are enhanced-electrostatic discharge (ESD) protected, exceeding ±15kV Human Body Model (HBM). Meets or exceeds the requirements of ANSI Standard TIA/EIA-485-A and ISO 8482:1987(E) specifications for V cc at +5V ±10% Low quiescent current - 0.5mA typ., 1mA max Low shutdown current (where applicable) - 1μA typical, 10μA max Guaranteed standard data rate 250Kbps or 10Mbps True Fail-Safe (Open, Short, Bus Idle) Receiver -7V to +12V common-mode input voltage range Half-Duplex mode configuration Allows up to 1/8 unit load (256 devices) on the same common bus Controlled driver output slew rate and receiver input filtering Active-high driver enable and active-low receiver Enable ESD protection on bus terminals ±15kV Human Body Model (HBM) Alternative replacement for MAX308x, MAX1308x, SN75HVD308x, SN65HVD308x Standard fanout driving 1 unit load (32 devices) on the ZT485E Series

Produits liés

Vous pourriez également être intéressé par les produits suivants :


Jetway, l'un des principaux fabricants mondiaux de PC industriels (IPC), est heureux de lancer la série HBFMF833 (W), un serveur barebone sans ventilateur certifié IP69K avec connecteurs M12 pour les environnements extrêmes.