Retour à la liste


Description

The ZT487E devices are 5V differential data line transceivers for RS485/RS422 communication that consist of one driver and one receiver with high level of ESD protection. They are designed for balanced transmission lines interface that meet ANSI standard TIA/EIA-485-A and ISO 8482:1987(E) specifications. The ZT487E devices spans out with half duplex, data rate guaranteed at 250K bit per second, and allow one-fourth of an unit load that fan out 128 devices sharing a common bus. The I/Os are enhanced-electrostatic discharge (ESD) protected, exceeding ±15kV Human Body Model (HBM). Meets or exceeds the requirements of ANSI Standard TIA/EIA-485-A and ISO 8482:1987(E) specifications for Vcc at +5V ±5% Low quiescent current - 0.5mA typ., 1mA max Low shutdown current (where applicable) - 0.01μA typical, 10μA max Guaranteed standard data rate 250Kbps Thermal shutdown protection -7V to +12V common-mode input voltage range Half-Duplex configuration Allows up to 1/4 unit load (128 devices) on the same common bus Controlled driver output slew rate and receiver input filtering Active-high driver enable and active-low receiver enable ESD Protection on bus terminals ±15kV Human Body Model (HBM) Drop-in Replacements for MAX487E, SN75LBC182 Standard fanout driving 1 unit load (32 devices) available on the ZT487E

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Salon SIDO
08/04/2018

Syscom-Prorep était au salon SIDO sur l'IoT à Lyon les 4-5 avril 2018

Le salon MtoM a encore une fois été un succès avec de nombreuses nouveautés en Lora/Sigfox, RFID, modules LTE et solutions eINK connectées.

The RDK-12GCONV UHD Converter Reference Design demonstrates the use of
Semtech's GS12241 12G UHD-SDI Re-timing Adaptive Equalizer, GS12090 Bidirectional
12G UHD-SDI Cable Equalizer/Driver, GS12281 12G UHD-SDI Re-timing Cable Driver,
and GS12070...

Software-Defined SFP, SDI dual receivers - IP switch host, MSA, HD-BNC

The software-defined SFP (emSFP) is a new class of SFP/SFP+ and emSFP where the hardware is generic (dual receiver to ANY format) and the software will dictated what the...

NEMEUS lance le Smart IoT Sensor compatible Arduino dédié à la réalisation de prototypes utilisant les technologies Sigfox®, LoRa®, Bluetooth® Low Energy, GPS/ GNSS

ACTUELLEMENT EN PROMOTION

Top