Retour à la liste

Command Controlled TFT Touch Module

Demande de rappel sur ce produit

Vous êtes intéressé par ce produit ? Laissez-nous vos coordonnées pour être recontacté par nos services.

Nom *

Prénom *

Société *

Code postal *

E-mail *

Téléphone *

* Veuillez remplir tous les champs obligatoires


Description

Metallized Projective Capacitive Touch

Two metallized layers(x-y) are overlaid onto an LCD screen. These thin-film metallic panels have a lower impedance than typical ITO** touch panels. This allows for a higher S/N ratio, wider touch sense margin, and better overall sensitivity.

** ITO = Indium Tin Oxide

GT-CP_expand

Selectable Touch Detection Method

Other than the general X-Y coordinate method, sections of the touch screen can be treated as individual switches.

Selectable Touch Detection Method

High Brightness

A 1,000 cd/m2 TFT panel is used

*Actual brightness is 850cd/m2

Stable Operation

Variable projection radius. Tested up to a 5mm acrylic overlay without affecting touch response under factory conditions.

Stable Operation

Adaptable Sensitivity

No interference from gloves or liquid. Maintains a smooth HMI.

Adaptable Sensitivity

Multiple Touches

Handles up to 10 concurrent touches at a time.

Multiple Touches

Easily Cleaned

Glass surface is damage-resistant and tolerant to chemical cleaning solutions.

Easily Cleaned

Simple Interface

Command-based controls are easily driven by off-the-shelf MCUs.

 

Display Size 154.08 x 85.92 mm (7 inch)
PCB Size 165.0 x 118.5 mm
Display Resolution 800 x 480 pixels
Number of Colors approx. 65K Colors
Operating Temp. -20 to +70 ℃
Brightness (Typ.) 425 cd/m2 at 50% Brightness
850 cd/m2 at 100% Brightness
Operating Power 5V / 720mA (Typical) with 100% Brightness
Interfaces Serial interface (UART/ I2C/ SPI CMOS -level)
USB interface (High-speed / Full-speed)
I/O Ports 26 general-purpose I/O ports
Character Fonts ASCII / Japanese / Chinese / Korean (Outline font)
Touch Detection Projection type capacitive.
Metallized Projective Capacitive Touch (MPCT) technology is used.
Multiple Touch 10-point touch maximum (DRY condition

Télécharger le(s) PDF(S)

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Salon SIDO
30/03/2018

Syscom-Prorep sera au salon SIDO sur l'IoT à Lyon les 4-5 avril 2018

Le salon MtoM a encore une fois été un succès avec de nombreuses nouveautés en Lora/Sigfox, RFID, modules LTE et solutions eINK connectées.

The RDK-12GCONV UHD Converter Reference Design demonstrates the use of
Semtech's GS12241 12G UHD-SDI Re-timing Adaptive Equalizer, GS12090 Bidirectional
12G UHD-SDI Cable Equalizer/Driver, GS12281 12G UHD-SDI Re-timing Cable Driver,
and GS12070...

Software-Defined SFP, SDI dual receivers - IP switch host, MSA, HD-BNC

The software-defined SFP (emSFP) is a new class of SFP/SFP+ and emSFP where the hardware is generic (dual receiver to ANY format) and the software will dictated what the...

NEMEUS lance le Smart IoT Sensor compatible Arduino dédié à la réalisation de prototypes utilisant les technologies Sigfox®, LoRa®, Bluetooth® Low Energy, GPS/ GNSS

ACTUELLEMENT EN PROMOTION

Top