Retour à la liste

Digital Video Input GT-1P Series Noritake’s GT1280X800A-1303P is an embedded touch monitor designed to smoothly integrate into any project. The module has a digital video input and a touch panel. The digital video input can be connected to an HDMI interface and touch works via USB as an HID compliant device. The mounted FLETAS® touch panel has high touch sensitivity that can operate accurately in demanding environments.

Demande de rappel sur ce produit

Vous êtes intéressé par ce produit ? Laissez-nous vos coordonnées pour être recontacté par nos services.

Nom *

Prénom *

Société *

Code postal *

E-mail *

Téléphone *

* Veuillez remplir tous les champs obligatoires


Description

Features

  • 10.1″ TFT with industrial grade PCB design
  • FLETAS® Metallized Projective Capacitive Touch
  • PC / SBC ready (supports EDID for Plug & Play (auto display settings))
  • A 1,000 cd/m2(nit) TFT panel is used (* actual brightness is 850cd/m2(nit))
  • Touch sensitivity is adjustable via byte commands
  • 5V single power supply

High Brightness

A 1,000 cd/m2 TFT panel is used
*Actual brightness is 850cd/m2

Stable Operation

Stable Operation

Variable projection radius. Tested up to a 5mm acrylic overlay without affecting touch response under factory conditions.

Adaptable Sensitivity

Adaptable Sensitivity

No interference from gloves or liquid. Maintains a smooth HMI.

Multiple Touches

Multiple Touches

Handles up to 10 concurrent touches at a time.

Easily Cleaned

Easily Cleaned

Glass surface is damage-resistant and tolerant to chemical cleaning solutions.

Touch Sensitivity Adjustment

By sending simple commands, touch sensitivity is easily adjusted.

Specification

Module GT1280X800A-1303P
Display Size 216.96 mm x 135.60 mm (10.1 inch)
PCB Size 230.0 x 174.0 mm
Display Resolution 1280 x 800 pixels
Number of Colors approx. 65K Colors
Operating Temp. -20 to +70 ℃
Brightness (Typ.) 425 cd/m2 at 50% Brightness
850 cd/m2 at 100% Brightness
Operating Power 5V / 1.5A (Typical) with 100% Brightness
Interfaces Serial interface (UART/ I2C)
USB (HID compliant)
HDMI (Video signal only)
Touch Detection Projection type capacitive.
Metallized Projective Capacitive Touch (MPCT) technology is used.
Multiple Touch 10-point touch maximum (DRY condition

Télécharger le(s) PDF(S)

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Salon SIDO
30/03/2018

Syscom-Prorep sera au salon SIDO sur l'IoT à Lyon les 4-5 avril 2018

Le salon MtoM a encore une fois été un succès avec de nombreuses nouveautés en Lora/Sigfox, RFID, modules LTE et solutions eINK connectées.

The RDK-12GCONV UHD Converter Reference Design demonstrates the use of
Semtech's GS12241 12G UHD-SDI Re-timing Adaptive Equalizer, GS12090 Bidirectional
12G UHD-SDI Cable Equalizer/Driver, GS12281 12G UHD-SDI Re-timing Cable Driver,
and GS12070...

Software-Defined SFP, SDI dual receivers - IP switch host, MSA, HD-BNC

The software-defined SFP (emSFP) is a new class of SFP/SFP+ and emSFP where the hardware is generic (dual receiver to ANY format) and the software will dictated what the...

NEMEUS lance le Smart IoT Sensor compatible Arduino dédié à la réalisation de prototypes utilisant les technologies Sigfox®, LoRa®, Bluetooth® Low Energy, GPS/ GNSS

ACTUELLEMENT EN PROMOTION

Top