Retour à la liste

GT-CP offers intelligent command operation that works with high or low-end microcontrollers and can easily be used in an embedded GUI application. Powerful commands minimize host overhead and improve development efficiency. Built-in memory allows for quick and easy access to multiple language font tables and user-defined interface graphics.

Demande de rappel sur ce produit

Vous êtes intéressé par ce produit ? Laissez-nous vos coordonnées pour être recontacté par nos services.

Nom *

Prénom *

Société *

Code postal *

E-mail *

Téléphone *

* Veuillez remplir tous les champs obligatoires


Description

High Brightness

A 1,000 cd/m2 TFT panel is used

*Actual brightness is 850cd/m2

Stable Operation

Stable Operation

Variable projection radius. Tested up to a 5mm acrylic overlay without affecting touch response under factory conditions.

Adaptable Sensitivity

Adaptable Sensitivity

No interference from gloves or liquid. Maintains a smooth HMI.

Multiple Touches

Multiple Touches

Handles up to 10 concurrent touches at a time.

Easily Cleaned

Easily Cleaned

Glass surface is damage-resistant and tolerant to chemical cleaning solutions.

Simple Interface

Simple Interface

Command-based controls are easily driven by off-the-shelf MCUs.

Metallized Projective Capacitive Touch

Metallized Projective Capacitive Touch

Two metallized layers(x-y) are overlaid onto an LCD screen. These thin-film metallic panels have a lower impedance than typical ITO** touch panels. This allows for a higher S/N ratio, wider touch sense margin, and better overall sensitivity.

** ITO = Indium Tin Oxide

Selectable Touch Detection Method

Other than the general X-Y coordinate method, sections of the touch screen can be treated as individual switches.

PC / SBC Ready

Features

Intelligent TFT module

  • 7" TFT (800 x 480 dots)
  • Metallized Projective Capacitive Touch
  • Easy to use commands:
    - Display controls
    - Font options
    - Image controls
    - Touch controls

Metallized Projective Capacitive Touch (MPCT) technology

  • Adaptable Sensitivity
    Works with thick cover glass, gloves, and up to 6 mm air gap
  • Stable Operation
  • Selectable Touch Detection Method
  • Multiple Touches (10 maximum at dry condition)
  • Glass Made Screen (Easily cleaned)
  • Auto Calibration
  • Software adjustable sensitivity
  • Responsive with gloves and water spillage
  • High S/N ratio

Useful Function

  • Simple Commands
  • Program Macro Execution
  • 26 General I/O Ports
  • Built in Fonts (Including CJK)
  • On-board FROM (256 MB)

Specs

High Brightness

  • A 1,000cd/m2 TFT panel is used.
    *Actual brightness is 850cd/m2

Operation

  • DC 5V input
  • 3.3V communication signal

Outer dimension

  • 165.0 x 118.5 mm

Interface

  • Async Serial (3.3V CMOS)
  • I2C (3.3V CMOS)
  • SPI (3.3V CMOS)
  • USB (High-speed/Full-speed)

Font tables (Outline font)

  • ASCII
  • Japanese
  • Chinese
  • Korean

Télécharger le(s) PDF(S)

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Salon SIDO
30/03/2018

Syscom-Prorep sera au salon SIDO sur l'IoT à Lyon les 4-5 avril 2018

Le salon MtoM a encore une fois été un succès avec de nombreuses nouveautés en Lora/Sigfox, RFID, modules LTE et solutions eINK connectées.

The RDK-12GCONV UHD Converter Reference Design demonstrates the use of
Semtech's GS12241 12G UHD-SDI Re-timing Adaptive Equalizer, GS12090 Bidirectional
12G UHD-SDI Cable Equalizer/Driver, GS12281 12G UHD-SDI Re-timing Cable Driver,
and GS12070...

Software-Defined SFP, SDI dual receivers - IP switch host, MSA, HD-BNC

The software-defined SFP (emSFP) is a new class of SFP/SFP+ and emSFP where the hardware is generic (dual receiver to ANY format) and the software will dictated what the...

NEMEUS lance le Smart IoT Sensor compatible Arduino dédié à la réalisation de prototypes utilisant les technologies Sigfox®, LoRa®, Bluetooth® Low Energy, GPS/ GNSS

ACTUELLEMENT EN PROMOTION

Top