Retour à la liste


Description

The MCS7715 controller provides bridging between the Universal Serial Bus (USB) port, an enhanced UART, and a Parallel Printer port. This device contains all the necessary logic to communicate with the host computer via the USB bus. It supports Printers with hardware accelerated SPP mode. The MCS7715 contains a 3.3V regulator, operates in Bus-Powered mode, and has a reduced frequency (6 MHz) crystal oscillator. This combination of features allows significant cost savings in system design along with straightforward implementation of Serial Port and Parallel Port functionality into PC peripherals using the host's USB port. USB Specification 1.1 Compliant Single 5V Operation Low Power On-Chip Voltage Regulator Single Serial Port Supports up to 920 Kbps Serial Data Rate Supports 5, 6, 7, & 8-bit Data Widths Supports 1, 1.5, & 2 Stop Bits Supports Even, Odd, Mark, Space and None parities Single Printer Port Interface Internal Power-On Reset 2KV In-Circuit ESD protection for lower cost of external components Available in 48-Pin QFP Package Operating temperature range: 0°C to +70°C

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Salon SIDO
08/04/2018

Syscom-Prorep était au salon SIDO sur l'IoT à Lyon les 4-5 avril 2018

The RDK-12GCONV UHD Converter Reference Design demonstrates the use of
Semtech's GS12241 12G UHD-SDI Re-timing Adaptive Equalizer, GS12090 Bidirectional
12G UHD-SDI Cable Equalizer/Driver, GS12281 12G UHD-SDI Re-timing Cable Driver,
and GS12070...

Software-Defined SFP, SDI dual receivers - IP switch host, MSA, HD-BNC

The software-defined SFP (emSFP) is a new class of SFP/SFP+ and emSFP where the hardware is generic (dual receiver to ANY format) and the software will dictated what the...

NEMEUS lance le Smart IoT Sensor compatible Arduino dédié à la réalisation de prototypes utilisant les technologies Sigfox®, LoRa®, Bluetooth® Low Energy, GPS/ GNSS

ACTUELLEMENT EN PROMOTION

Top