USB Controller

Retour à la liste


Description

The MCS7820 is a USB-2.0 to Dual-Serial Port device. It has been developed to connect a wide range of standard serial devices to a USB host. The MCS7820 has a USB Device Controller connected to two (2) individual UARTs. Support for the following serial communication programs is included: HyperTerminal, PComm, Windows direct connection, Windows dial-up connection through modem, Networking over IrDA and Windows direct connection over IrDA, Minicom. USB-2.0 Device Controller On-Chip USB-2.0 PHY On-Chip Voltage Regulators Two 16c450/16c550 compatible UARTs Supports SIR IrDA Mode on any/all ports Supports RS-232, RS-485 and RS-422 Serial Ports 5, 6, 7 and 8-bit Serial Data support Hardware and Software Flow Control Serial Port speeds from 50 bps to 6 Mbps Custom BAUD Rates supported through external clock and/or by programming the internal PLL On-Chip 512-Byte FIFOs for upstream and downstream data transfers for each Serial Port Supports Remote Wakeup and Power Management features Serial Port Transceiver Shut-Down support Two-Wire I²C Interface for EEPROM EEPROM read/write through USB iSerial feature support with EEPROM One Bi-directional multi-function GPIO On-Chip buffers for Serial Port signals to operate without external Transceivers over short cable lengths Bus-Powered Device 48-Pin LQFP Package RoHS compliant Operating temperature range: 0°C to +70°C

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Circulaires, contraste élevé, ultra-minces, économie d'énergie et stabilité dans une très large plage de températures ; les écrans OLED de la série EA W128128-XR constituent la solution idéale pour les appareils portables compacts.

Jorjin Technologies propose un combo BLE 4.2 & Sigfox basé sur le chipset STM BlueNRG-1

Top