Retour à la liste

Demande de rappel sur ce produit

Vous êtes intéressé par ce produit ? Laissez-nous vos coordonnées pour être recontacté par nos services.

Nom *

Prénom *

Société *

Code postal *

E-mail *

Téléphone *

* Veuillez remplir tous les champs obligatoires


Description

he EP269 is a high performance 450 Mhz Dual Link DVI receiver with HDCP and 4 ports LVDS outputs. The chip is compliant with DVI Revision 1.0 specification and HDCP 2.0 specification. The chip supports display resolution up to 450 M pixels/second. The on-chip LVDS transmitter is capable of transmitting data at 165 M pixels/second each port. The LVDS outputs can be configured as 2-port outputs or 4-ports output. Data output sequence can also be configured as Sequential mode or Left-Right mode.
The on-chip Link On detection circuit will power down the DVI receiver and LVDS transmitter when there is no valid DVI input signals received. A Secondary Link Active detection circuit will configure the chip to operate at Dual Link mode or Single Link mode automatically.


Feature

•Dual Link DVI Receiver capable of receiving data at 450 M pixels/second
•4 Ports of LVDS Transmitter capable of transmitting data at 165 M pixels/second each port
•DVI specification 1.0 compliant
•HDCP specification 2.0 compliant
•Link On detection and Auto Power Down control
•Auto detection of Single-Link or Dual-Link operation
•Selection of 2-Port or 4-Port LVDS outputs
•Selection of LVDS data output sequence in Sequential mode or Left-Right mode
•LVDS ports swappable for easy PCB layout
•PLLs require no external components
•High skew tolerance: 1 full input clock cycle for inter-channel within a link plus 1 full input clock cycle between links
•Low current consumption in Power Down mode
•Link On detection output
•Secondary Link Active detection output
•External EEPROM interface for Configuration and/or HDCP keys download
•128-pin LQFP

BLOCK DIAGRAMM

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Salon SIDO
08/04/2018

Syscom-Prorep était au salon SIDO sur l'IoT à Lyon les 4-5 avril 2018

Le salon MtoM a encore une fois été un succès avec de nombreuses nouveautés en Lora/Sigfox, RFID, modules LTE et solutions eINK connectées.

The RDK-12GCONV UHD Converter Reference Design demonstrates the use of
Semtech's GS12241 12G UHD-SDI Re-timing Adaptive Equalizer, GS12090 Bidirectional
12G UHD-SDI Cable Equalizer/Driver, GS12281 12G UHD-SDI Re-timing Cable Driver,
and GS12070...

Software-Defined SFP, SDI dual receivers - IP switch host, MSA, HD-BNC

The software-defined SFP (emSFP) is a new class of SFP/SFP+ and emSFP where the hardware is generic (dual receiver to ANY format) and the software will dictated what the...

NEMEUS lance le Smart IoT Sensor compatible Arduino dédié à la réalisation de prototypes utilisant les technologies Sigfox®, LoRa®, Bluetooth® Low Energy, GPS/ GNSS

ACTUELLEMENT EN PROMOTION

Top