The EB34TD1T-SM is an electrical emSFP transmitter module designed to convert SDI to an HDMI signal output without scaling artifacts.
The video sfp EB34TD1T-SM is an 3G/HD/SD SDI to HDMI1.4 and DVI1.0 video sfp (emSFP) converter. This video SFP is designed to convert 3G/HD/SD SDI to HDMI 1.4 signal without scaling artifacts.
Up to 8 channels of 3G/HD/SD-SDI audio channels are re- embedded in the HDMI stream.
SMPTE 424M, 292M and 259M compliant
SDI Reclocked Loopback to host connector
Supported format: 525/625, 720p/1080i (50/59.94/60Hz), 1080p (23.98/24/15/29.97/30/50/59.94/60Hz)
24 bit (3x8 bits)
RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4
RGB Range (Full/SMPTE)
Up to 2 channel audio embedding (PCM)
HDMI 1.4 Type D connector
HDMI Type D plug with retention
Control via serial interface includes:
Voltage & Temperature Monitoring
HDMI/DVI interface configuration
EDID reading, Audio mapping
Low Power Consumption - Single Supply +3.3V 58.5mm x 13.4mm x 8.6mm SFP Package Operating temperature: -20°C to 80°C
Delay : 40 to 200 pixels (depending on the video format and the frequency of the conversion; if applicable)
High-density and future-proof architecture
Pathological signal support
Superior jitter management and signal regeneration
Monitoring and diagnostics at the edge of your product via serial communication
Superior link budget performance compares to the ST-297 specification
Highest optical performance (fiber stub) and lowest defect rate in the market