Syscom-Prorep lance son activité de fabrication de PC Industriels

Retour à la liste


The AX88178 USB to 10/100/1000 Gigabit Ethernet/HomePNA/HomePlug controller is a high performance and highly integrated ASIC with embedded 40KB SRAM for packet buffering. It enables low cost and affordable Gigabit Ethernet network connection to desktop, notebook PC, and embedded system using popular USB ports. It has an USB interface to communicate with USB host controller and is compliant with USB specification V1.0, V1.1 and V2.0. It implements 10/100/1000Mbps Ethernet LAN function based on IEEE802.3, IEEE802.3u, IEEE802.3ab standards or HomePNA standard. It supports media-independent interface (MII) to simplify the design on implementing Fast Ethernet and HomePNA functions. It also provides gigabit media-independent (GMII) and reduced gigabit media-independent (RGMII) interface for interfacing with Gigabit Ethernet PHY. Single chip USB to 10/100/1000 Gigabit Ethernet and HomePNA and HomePlug Network Controller. USB specification 1.0 and 1.1 and 2.0 compliant. Supports USB Full and High Speed modes with Bus power capability. Supports 4 endpoints on USB interface. High performance packet transfer rate over USB bus using proprietary burst transfer mechanism (US Patent Approval). IEEE 802.3, 802.3u and 802.3ab (10BASE-T, 100BASE-TX, and 1000BASE-T) compatible. Embedded 20KB SRAM for RX packet buffering and 20KB SRAM for TX packet buffering. Supports both full-duplex and half-duplex operation on Fast Ethernet. Provide MII/GMII/RGMII interfaces for Ethernet PHY interface and MII interface for HomePNA/HomePlug PHY interface. Supports Jumbo packet of up to 9KB. Supports suspend mode and remote wakeup via link-up, magic packet, or external pin. Optional PHY power down during suspend mode. Supports 256/512 bytes (93c56/93c66) of serial EEPROM (for storing USB Descriptors). Supports automatic loading of Ethernet ID, USB Descriptors and Adapter Configuration from EEPROM after power-on initialization. External PHY loop-back diagnostic capability. Integrates on-chip 3.3V to 2.5V voltage regulator and requires only single power supply: 3.3V. Small form factor with 128-pin LQFP package. 12MHz clock input from either crystal or oscillator source

Produits liés

Vous pourriez également être intéressé par les produits suivants :


L'écran de 14" de NEWAY CU1400 offre:
- Résolution Full HD de 1920x1080 avec un écran capacitif de 10 points
- 1x USB type C ou 1x HDMI pour la partie vidéo
- Léger et compacte avec un boitier magnétique pour le bureau
- 1x Mini HDMI, 1x USB...

ELECTRONIC ASSEMBLY présente dans la continuité de la famille uniTFT une nouvelle série uniTFTs de 2'' à 4.3".