USB to LAN

Retour à la liste


Description

The MCS7832 USB to 10/100 Ethernet Controller is a unique solution to interface 10/100 Base-T Ethernet devices to the Universal Serial Bus (USB-2.0). This device has been specifically designed to provide a simple, low cost solution to communicate with applications needing plug-and play 10/100 Ethernet connectivity with minimal design time. This is accomplished by its highly integrated functionality, robust software suite, WHQL and USB-IF certification, low pin-count and high performance. It provides internal buffering to enable parallel operations from USB ports on the host side, and MAC ports on the Ethernet side. It also provides a serial interface for an EEPROM for storing the MAC-ID, VID, PID, and other configurable settings. USB 2.0 Device Controller Supports HS (480Mbps) and FS (12Mbps) modes USB Specification 2.0 Compliant Integrated USB 2.0 Hi-Speed PHY Supports all USB Standard Commands Supports Five Vendor Specific Commands Supports USB Suspend/Resume Detection Logic High Performance 10/100 Mbps Ethernet Controller Integrated 10/100 MAC and PHY Fully compliant with IEEE 802.3 Specification Supports Full Duplex Operation in 10/100 Mbps Modes Exhaustive MAC Status Reporting Supports PAUSE Control Frames Supports various low power Mode Suite of robust, software drivers for major operating systems Serial Interface to Read/Write to EEPROM through USB On-Chip FIFOs for Upstream and Downstream Data Transfers WHQL Compatible hardware Configurable Vendor and Product ID's through EEPROM Supports iSerial Number and Locally Administered Network Address 64 Pin-LQFP Package RoHS compliant Operating temperature range: 0°C to +70°C

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

ELECTRONIC ASSEMBLY présente dans la continuité de la famille uniTFT une nouvelle série uniTFTs de 2'' à 4.3".

Jorjin Technologies propose un combo BLE 4.2 & Sigfox basé sur le chipset STM BlueNRG-1

Top